Brixwell Brixwell Wall Mount Offset Back Plate Brass Hinge, For Frameless Glass Doors, 5/16" To 1/2" Tempered Glass, Brushed Nickel Finish

Brixwell wall mount offset back plate hinge is designed for glass shower door installations where controlled movement are required. The hinge is manufactured from brass with brushed nickel and uses stainless steel pins and springs for internal movement. It is intended for use with monolithic tempered safety glass ranging from 5/16" to 1/2" in thickness. The wall mount offset back plate configuration allows glass panels to be mounted directly to the wall while maintaining proper spacing and alignment during operation. The hinge supports a 90 degree inward and 90 degree outward swing, allowing practical door movement in shower enclosures. A self-centering closing action activates when the door moves within 15 degree of the closed position, guiding the glass panel back toward its resting point. The hinge includes a reversible pivot pin with marked 90 degree and 85 degree positions, allowing selection between standard closing or a tighter closure into the shower interior. Overall hinge height measures 3-1/2" with a width of 2-3/16". The back plate height is 3-1/2" and the back plate width measures 2". Using two hinges supports doors up to 80 lbs with a maximum door width of 28". Using three hinges supports doors up to 120 lbs with a maximum width of 32". Gaskets, screws are included for installation. For public safety, use only tempered safety glass. Care Instructions: Do not use abrasive cleaners or scrubbing tools, as they can damage the protective coating and surface finish of the hardware.