Brixwell Brixwell Wall Mount H-Back Plate Hinge Brass, 5/16" To 1/2" Glazing Thickness, Beveled Edge, Oil Rubbed Bronze Finish

The Brixwell wall mount H-back plate hinge is designed for shower door installations where controlled swing movement and stable wall mounting are required. This hinge is made from brass and finished in oil rubbed bronze to support coordinated bathroom hardware layouts. It uses an H-style back plate that mounts directly to the wall and supports monolithic tempered glass panels with glazing thickness from 5/16" to 1/2". The hinge measures 3-1/2" in height and 2-3/16" in width. The back plate height is 3-1/2" with a back plate width of 1-15/16". When installed using two hinges, the system supports a maximum door width of 28" and a maximum door weight of 80 lbs. When three hinges are used, it supports door widths up to 32" and door weights up to 120 lbs. This hinge allows approximately 90 Degree In and 90 Degree Out swing. A self centering action engages when the door reaches within 15 Degree of the closed position. The beveled edge profile provides clean glass contact points. The hinge includes gaskets, screws for installation. A dual degree pivot pin is included, allowing the closing position to be adjusted by 5 Degree inward when required. This hinge commonly used in residential and hotel shower door installations. Care: Wipe dry after use. Clean weekly with mild soap and warm water using a soft cloth. Do not use abrasive cleaners or scrubbing tools.